- Grossistas de rolamentos
- Rolamentos de fag mancais SKF Unidades de rolamentos
Português
English
العربية
Deutsch
Ελληνικά
Español
Français
Bahasa Indonesia
Italiano
日本語
Русский язык
Shqip
Svenska
ไทย
Türkçe
Українська
- Endereço258 Bearing Wholesalers Center Hill, Singapura 628925
- Endereço de fábrica258 Bearing Wholesalers Center Hill, Singapura 628925
- tempo de trabalho9: 00-18: 00 (بتوقيت بكين)
- Telefone(Tempo de Trabalho)+6531591338
- Telefone(O tempo de trabalho não)+6531591338
- Fax+6531591338
THRUST SPHERICAL ROLLER BEARINGS TYPES TSR-EJ AND TSR-EM
Contate agoraThrust spherical roller bearings (type TSR) are ideal for applications where conditions include heavy loads, difficulties in establishing or maintaining housing alignment and problems with shaft deflection.
Available with cylindrical or spherical rollers, NSK's thrust roller bearings sustain only axial loads, but they are suitable for heavy loads and have high axial rigidity. Spherical thrust roller bearings contain convex rollers and have a self- aligning capability and are free of any influence of mounting error or shaft deflection. Standard cages are machined brass, where the E-type offers a pressed cage for high load capacity.
These are thrust bearings containing convex rollers. They have a self-aligning capability and are free of any influence of mounting error or shaft deflection. Besides the original type, the E type with pressed cages for high load capacity is also available. Their bearing numbers are suffixed by E.
For horizontal shaft or high speed application, machined brass cages are recommended. For details, contact NSK. Since there are several places where lubrication is difficult, such as the area between the roller heads and inner ring rib, the sliding surfaces between cage and guide sleeve, etc., oil lubrication should be used even at low speed. The cages in the original type are machined brass.
| Bearing Number | Bore Dia | Outer DIa | Width | Size |
|---|